Filter
Intermod Suppression Panels
An intermod suppression panel consists of an isolator and a second harmonic filter. An isolator allows RF to pass in only one direction and the second harmonic filter reduces second harmonic signal produced by the isolator. Together they reduce intermodulation by suppressing signals received by the transmitting antenna. They also prevent any reflected power to be reflected to a load rather your power amplifier, which could cause significant damage to your amplifier. Reflected power can be caused by high VSWR, an open circuit, shorted antenna or from co-located transmitters at the site. Intermod Suppression Panels are a great way to clean up interference at a congested site, when a combining system is not feasible.
14 products

PC2214
I.M. Suppression panel, dual stage, 30+125W loads, 132-174 MHz
$0.00
PC3214
I.M. Suppression panel, dual stage, 30+125W loads, 406-512 MHz
$0.00
PC2213
I.M. Suppression panel, dual stage, 30+60W loads, 132-174 MHz
$0.00
PC3213
I.M. suppression panel, dual stage, 30+60W loads, 406-512 MHz
$0.00
PC2212
I.M. Suppression panel, dual stage, two 30W loads, 132-174 MHz
$0.00
PC3212
I.M. Suppression panel, dual stage, two 30W loads, 406-512 MHz
$0.00
PC4214
I.M. Suppression panel, rack mount, dual stage isolator, 30+125 Watt loads, 806-890 MHz
$0.00
PC4213
I.M. Suppression panel, rack mount, dual stage isolator, 30+60 Watt loads, 806-960 MHz
$0.00
PC2114
I.M. Suppression panel, single stage, 125W load, 132-174 MHz
$0.00
PC3114
I.M. Suppression panel, single stage, 125W load, 406-512 MHz
$0.00
PC2112
I.M. Suppression panel, single stage, 30W load, 132-174 MHz
$0.00
PC3112
I.M. Suppression panel, single stage, 30W load, 406-512 MHz
$0.00
PC2113
I.M. Suppression panel, single stage, 60W load, 132-174 MHz
$0.00
PC3113
I.M. Suppression panel, single stage, 60W load, 406-512 MHz
$0.00